Описание
Metal power locking and sealing device of barrier type. One of the most reliable devices in the world.
Barrier Force seal with adjustable length. To prevent even a minimal opening of the container doors, the central locking rods should be tightened as far as possible.
This can be done by the holes located in a row on the bracket. The bolt seal blocking FORK SEAL must rotate around its axis; this movement provides an additional guarantee of immunity.
In addition, NITROCEMENTATION guarantees additional strength , therefore, it is very difficult to cut off this filling. Both on the sealing bracket and on the bolt seal there is one and the same numbering and individual marking. It is impossible to re-manufacture both parts without serious material costs.
SIZE
Width: 35 mm
Length: 480 mm
MATERIAL
Galvanized steel
On request, the sealer can be galvanized in the following colors: red-green-yellow-orange.
NUMBERING AND INDIVIDUAL MARKING
— Printing: Thermal engraving on the head of the bolt seal.
— Sequential numbering up to 6 digits.
— Application of individual marking: up to 15 characters per line.
— On request, it is possible to mark the seal with the customer’s logo.
— The logo and numbering are repeated on the metal bracket of the seal.
— The logo and numbering are repeated on the metal bolt of the seal.
PACKAGING
25 pieces per box
Box size: 50x20x15 cm
Box weight: 15 kg
RELATED PRODUCTS
Сертификаты
Dayton T. Brown ISO 17712
Вам также будет интересно…
-
BLOCK BAR
Пломба типа Барьер Сил. Изготовлено целиком из металла
-
FRISSO SEAL 2×315 ММ
Пластиковая пломба затягивающаяся. Двойная нумерация на корпусе пломбы.
-
JUPITER 1,3×225 ММ
Пломба с пременной длиной петли с запорным металлическим механизмом.
Похожие товары
-
BAG SEAL 6×420 ММ
Пломба пластиковая затягивающаяся. Размер этикетки: 27х71 мм
-
БАКИ И БОЧКИ С ОТВЕРСТИЕМ ДЛЯ ПЛОМБИРОВАНИЯ
Эти бочки, баки и ведра подходят для химического анализа в промышленных условиях. Они снабжены крышками с отверстиями для пломбирования.
-
ПРЯМОУГОЛЬНЫЕ БУТЫЛИ
Снабжены подкрышкой и крышкой с отверстиями для пломб.